Support

FAQ

    Previous
    5. Audit and tune your Proofer
    1. Fix the Lighting Condition first
    2. Second step: standarize your Display
    3. Softproofing Station
    4. Start tracking and comparing your Instruments
    5. Audit and tune your Proofer
    6. Benchmark Proofer
    7. Benchmark Offset Press
    8. Benchmarking Large Format Printer
    9. Benchmarking Digital Press
    Next
    November 29, 2022

    Audit and tune your Proofer

    Start from the audit. To do that be sure that you can measure the test chart (have a compatible instrument). If not create an equivalent version that you can measure. The principle is simple: TC1617 test form (1617 color samples) has to be printed and data analyzed with Print Inspector

    Important notes:

    • For proofer don't apply SCCA - keep it always off!
    • Be sure to evaluate to simulation profile - be sure that the track selection matches your RIP settings
    • Load the proofing paper that can successfully render simulated (L* value should be at visible higher)
    • Don't forget to use the CC Measurement Backer
    • Wait after printing to measure dry inks.

    Download the Proofer Audit test form.

    Previous Next

    Contact ChromaChecker Support

    Additional information and Support Form is available for logged users.