Support
- Intro
- Inspectors
- Print Industry
- Brand & Print Buyers
- Color Manufacturing
- Design & Photography
- CC Products
- Tests & Audits
- Trainings
- CC-2D Barcode Reader
- RHT wireless datalogger (discontinued)
- RHT USB Sensor/DataLogger
-
CC Measurement Backer
- ChromaChecker Nano
-
Manager or Operator Cloud Interface
-
Troubleshooting CC-2D Barcode Reader
-
CC XY-table
-
CC Capture
- Summary of Standard Color Bars And Applications
- Connect Capture
- Control Strip Library
- Quick Start — CC Capture
- CC Capture Technical Requirements
- CC Capture Features
-
Supported Instruments
- X-Rite i1 Pro
- X-Rite i1 iO
- X-Rite i1 iSis
- X-Rite eXact
- X-Rite eXact2
- Myiro-1
- Techkon SpectroDense
- Calibrate ColorChecker Studio (Xrite i1Studio)
- CC Sphere Portable Spectrophotometer
- Variable Spectro 1 (Bridge)
- Spectro with Bridge
- X-Rite ICPlate2
- NIX Spectro 2
- Veoria DeltaOne and DeltaWeb
- Techkon SpectroPlate
- CC-380 Triple Angles Gloss Meter
- CC-XY Table S
- Introduction to QuickChecker Interface
- CC Capture Print Inspector
- CC Capture and Barcodes
- CC Capture
- CC Capture Substrate Inspector
- CC Capture Color Inspector
- QuickStart — Measure Lighting Condition
- CC Capture Plate Inspector
- No Instrument Color Grid
- Troubleshooting CC Capture
- 3rd party devices
- CC Capture download
- Trial vs. Registered Version
- Instruments Inspector Targets
-
Substrate Inspector B&W Backer
- E-Factor Exercise/Sampler
- CC Uploader
-
CC Connect
How to generate iSis barcode chart with i1Profiler
- Launch i1 Profiler
- Got to CMYK printer Profiling (or RGB if color space is RGB)
- Drag-and-Drop a patch list (exported from ChromaChecker or any other software) on PatchSet icon
- Go to Test chart icon and select required parameters. It is critical to check "Enable barcode" in Device setup. Adopt "Page setup" and "Patch layout" according to own preferences:
- Save It! use unique name for first printer/track combination
IMPORTANT NOTE:
don't use special characters! we recommend not using "space"
keep name short!
- Get chart image ("Save as..." button below the image.
- DONE!
Repeat last two steps if you need printer/substrate variants
At this moment you may hit "Save" button (Page data section) to create more version with different names for other printer/substrate combinations. Whenever a new name is applied don't forget to download corresponding image ( Save as... button).
Important Note:
Xrite i1profiler is adding page numbers to the barcode - that why it might not match exactly saved name. The best approach is to use CC Capture to read barcode content after printing.
Read iSis barcode with CC Capture
Verify if all is correct before final implementation in production chain.
Alias iSis barcode string to the Scanning Template
Contact ChromaChecker Support
Additional information and Support Form is available for logged users.