Support
- Intro
- Inspectors
- Print Industry
- Brand & Print Buyers
- Color Manufacturing
- Design & Photography
- CC Products
- Tests & Audits
- Trainings
- CC-2D Barcode Reader
- RHT wireless datalogger (discontinued)
- RHT USB Sensor/DataLogger
-
CC Measurement Backer
- ChromaChecker Nano
-
Manager or Operator Cloud Interface
-
Troubleshooting CC-2D Barcode Reader
-
CC XY-table
-
CC Capture
- Summary of Standard Color Bars And Applications
- Connect Capture
- Control Strip Library
- Quick Start — CC Capture
- CC Capture Technical Requirements
- CC Capture Features
-
Supported Instruments
- X-Rite i1 Pro
- X-Rite i1 iO
- X-Rite i1 iSis
- X-Rite eXact
- X-Rite eXact2
- Myiro-1
- Techkon SpectroDense
- Calibrate ColorChecker Studio (Xrite i1Studio)
- CC Sphere Portable Spectrophotometer
- Variable Spectro 1 (Bridge)
- Spectro with Bridge
- X-Rite ICPlate2
- NIX Spectro 2
- Veoria DeltaOne and DeltaWeb
- Techkon SpectroPlate
- CC-380 Triple Angles Gloss Meter
- CC-XY Table S
- Introduction to QuickChecker Interface
- CC Capture Print Inspector
- CC Capture and Barcodes
- CC Capture
- CC Capture Substrate Inspector
- CC Capture Color Inspector
- QuickStart — Measure Lighting Condition
- CC Capture Plate Inspector
- No Instrument Color Grid
- Troubleshooting CC Capture
- 3rd party devices
- CC Capture download
- Trial vs. Registered Version
- Instruments Inspector Targets
-
Substrate Inspector B&W Backer
- E-Factor Exercise/Sampler
- CC Uploader
-
CC Connect
RHT wireless datalogger (discontinued)
How to connect?
Use our SETUP ASSISTANT to connect your RHT Cloud Data-Logger.
The Device has a built-in OLED display. Follow on-screen instructions for fast installation.
The procedure consist of two logical parts:
- setup wi-fi connection - datalogger should connect to the Internet
- register datalogger in Environmental Instrument - CC Server will start capture data and assign them to a selected printing device.
Device Specification:
This device uses IoT technology. Data are transmitted to CC Server using the SOAP protocol.
The new device starts in AP mode - The user may find Wi-Fi Access Point called DataLogger then connect to a web-server application that enables setting basic preferences.
Sensor
Temperature: | Relative humidity | |
Accuracy: | ± 0,55 °C – 0,15°C see graph below |
± 2,5 %RH from 20 to 60 %RH at 23 °C (73,4 °F) ± 3,5 %RH from 0 to 20 %RH at 23 °C (73,4 °F) ± 4,5 %RH from 60 to 100 %RH at 23 °C (73,4 °F) see graph below |
Range: | -20 to +70 °C | 0 to 100 %RH |
Resolution: | 0,1 °C (0,1 °F) | 0,1 %RH |
Wi-Fi module
- Mode: 802.11b/g
- Channel 4 / Channel width :20Mhz
- Band: 2.4GHz ISM
- Max rate: 54Mbps
- WPA2 (PSK)
- Beacon Interval: 100 ms
- Encryption AES + TKIP
Dimensions:
55 x 80 x 18 mm
53 g (1.8 oz)
Display Messages:
Properly configured and connected
Factory defaults • device not connected to the Internet
AP mode (web-browser connected )
Resetting
Connecting with the Internet (local Access Point)
default password 123412341234 can be changed
IP in AP mode: 192.168.4.1
Current settings:
Dev: - device name
MAC: - Mac address used as serial number
AP: - IP of local network Access Point
LOC: - an IP address in the local network
- enter this address in the web browser to access the device's application
G: - Gateway
D: - DNS server
M: - Mask
PDFs
Related Topics
Contact ChromaChecker Support
Additional information and Support Form is available for logged users.