Getting Started - Spot Matching and Color Process Control G7
Login as an Expert using the login and password you defined when registering, perform the basic configuration of the system, and collect measurement data from a minimum of 2 printing devices. For a new account, you will be greeted with the Configuration Wizard used to set up basic requirements. For an existing account, this requirement should have already been completed but it's important to review the following information for the certification examination.
Step By Step - Initial Configuration New Account
The steps include:
- Identifying Printing Devices
- Setting up the Users (Staff) using Accountability Inspector
- Downloading the Software based on the Instrument in Use
After downloading and installing the appropriate software, you can use any of these methods for collecting the measurement data:
- The Onboarding G7 Project
- Introduction to Spot Matching
- Scanning Control Strips for Process Control and G7 Compliance
- Analysis of Existing Measurement Data
Configuration Wizard
This provides a step-by-step guide for configuring printing devices, instruments, and downloading software
https://chromachecker.com/pi/en/setup_wizard
Manual Upload
You can manually upload a file using Print Inspector by selecting the blue cloud icon 
.
Automation of Uploading existing measurements
https://chromachecker.com/manuals/en/show/cc_uploader
Handheld Instrument or ISIS - G7 and GRACoL example
https://chromachecker.com/manuals/en/show/g7test
Additional Resources
ChromaChecker Manual - by selecting the menu item "?" and "manual"
Support Services - located by selecting "?" and "Contact Support"
Video
-
This tutorial shows you how easy it is to measure color bars using Chromachecker Capture software using an i1 instrument. ChromaChecker supports all color bars, all presses, and all instruments making it the optimal system for color quality control checking, correction, and reporting.
-
This tutorial demonstrates how to configure ChromaChecker Uploader to use ChromaChecker Print Inspector for analysis
-
Free Mac or Windows Application with File grabbing/ renaming utility and SOAP protocol built-in to efficient upload files from local hot folders to selected tracks.
This software has no direct Instrument support, but is designed to work with any software that can automatically export measurement data which then is uploaded to the ChromaChecker Cloud. -
Operators press-side can easily and quickly identify the density adjustment needed to match a given reference.
Related Topics
Contact ChromaChecker Support
Additional information and Support Form is available for logged users.
